parts
18" Control Plate. For use with Vosterman motor only. Call Customer Service for verification if needed.
California residents: Click here for Proposition 65 warning.
$ 400.00
36"x12"x6" - 2 pads per kit
PolarCool Pads are a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service.
Features:High Cooling EfficiencyExceptional cooling rates are achieved due to the design, m...
$ 144.00
Handle for 18" Stainless Steel/ Black Powder Coat units.
$ 26.00
18" Castor Wheel Kit. 2 swivel, 2 rigid. Comes with nuts, bolts & washers.
$ 65.00
PC 24" Control Plate
For use with Emerson motor. Call Customer Service for verification
California residents: Click here for Proposition 65 warning.
$ 400.00
24" Control Plate. For use with Vosterman motor only. Call Customer Service for verification if needed.
California residents: Click here for Proposition 65 warning.
$ 400.00
36" x 12" x 8" - 3 pads per kit
PolarCool Pads are a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service.
Features:High Cooling EfficiencyExceptional cooling rates are achieved due to the desi...
$ 204.00
4 Blade Red Fiberglass Prop. Used w/3017-5018 motor only. Will not work w/Vosterman Motor- part # 3017-0050.
Flat Rate Freight charge: $75
$ 354.00
EF GS 24- 3 Blade Prop galvanized. Replaces galvanized props only for old style 24" PC units.
Flat Rate Freight charge: $50
$ 225.00
24" Wheel Kit- Hard Small 4". Comes with 2 swivel / 2 rigid. All 24" models.
$ 145.00
Garden hose quick connects make connecting the PolarCool Evaporative Cooling System to a water source an effortless process. This kit comes with two all brass quick connect fittings that includes both the male and female end. Connect the male end of the fitting to the PolarCool water inlet and th...
$ 14.00
36" 3 Blade Red Fiberglass Prop used with Variable Speed only. Replacement part for 6403-5605
$ 297.00
36" Control Plate Assy. Fits Stainless or Black powdercoat. Note: Does not fit Zone 11K.
California residents: Click here for Proposition 65 warning.
$ 400.00
PC 36" Zone 11K Control Plate
California residents: Click here for Proposition 65 warning.
$ 400.00
Fits 36 Pro, Zone 11K & Stainless Steel Single Speed/ Direct Drive units. 48"x12"x6" - 4 pads per set.
PolarCool Pads are a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service.
Features:Hig...
$ 272.00
48"x12"x8" - 5 pads per kit
PolarCool Pads with MI-T-edg treatment are a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service.
Direct replacement pad kit / compatible with the following fans:
Po...
$ 454.00
48"x12"x8" - 6 Boxes of 5 pads Total = 30 Pads
PolarCool Pads with MI-T-edg treatment are a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service.
Direct replacement pad kit / compatible with the...
$ 2,599.00
48"x12"x6" - 1 pad
PolarCool Pads with MI-T-edg treatment are a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service.
Direct replacement pad kit / compatible with the following fans:
PolarCool 3...
$ 68.00
EF GS 36- 4 Blade Prop galvanized. Replaces galvanized props used in old style belt drive 36" units only.
$ 371.00
48"x12"x8" - 1 pad
PolarCool Pads with MI-T-edg treatment are a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service.
Direct replacement pad kit / compatible with the following fans:
PolarCool 3...
$ 91.00
Spray Bar Splash Guard For 36" Zone only.
$ 45.00
36/48" Wheel Kit- Hard Med. 6". Comes with 2 swivel / 2 rigid. All 36 & 48" models.
$ 282.00
60"x12"x8" - 6 pads per kit
PolarCool Pads are a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service.
Features:High Cooling EfficiencyExceptional cooling rates are achieved due to the design, m...
$ 680.00
Sheave AK104/MA103x1. Fits all models. Note: All 48" PC units are 240 volt only.
$ 86.00
Note: When replacing red fiberglass prop must order new shaft/key shears. See notes on shaft part numbers 0411-5626 & 0411-14099 to determine which shaft needed and # of shears. Verify by shaft dimensions.
$ 549.00
Touch Pad Control Seal. Fits all 18/24/36 models- except Zone 11K.
$ 20.00
Touch Pad Control Seal. Fits Zone 11K units only.
$ 18.00
Storage Cover perfect solution for covering and protecting your PolarCool fan.
$ 159.00
Storage Cover perfect solution for covering and protecting your PolarCool fan.
$ 179.00
Storage Cover perfect solution for covering and protecting your PolarCool fan. Note: Fits the PolarCool 36" Model # 6622-1200
$ 199.00
Storage Cover perfect solution for covering and protecting your PolarCool fan.
Note: Fits the PolarCool Pro 36" Model # 6622-6000
$ 199.00
Storage Cover perfect solution for covering and protecting your PolarCool fan.
$ 249.00
Drain Outlet for easy cleaning of unit. Fits all Stainless Steel and Black Powder Coat PC units.
$ 9.90
Small black drain cap. Fits drain assy. on all Stainless Steel and Black Powder Coat PC units.
$ 4.80
Evap-O-Matic with AT-8TM tablets prevent the buildup of slime and scale that can clog the pads of the PolarCool evaporative cooling fan, as well as eliminate odors created by microorganisms. They are easy to use, completely water-soluble, and do not form deposits in the reservoir.
CHARACTERISTICS...
From $ 74.95
"Fits newer 48"" units with ""Vertical"" internals and pillow block bearings. Not used with units having verticals and flange bearings - see shaft #0411-2110 for this model. Note: Requires 2 shear keys part: 1019-2417."
$ 38.00
Fits 48" Units with "X"-Brace internals, pillow block bearings.Requires 2 keys part: 1019-2417
$ 39.00
Fits 36" and 48" belt drive units with "Flange Bearing" setup. Note: Requires 2 shear keys part #: 1019-2417.
$ 34.74
Toggle switch (DPST) used to start/stop the Fan or Pump. Pump switch should never be turned on unless there is water in the pump/reservoir. For use with 48" 240v Models only.
California residents: Click here for Proposition 65 warning.
$ 16.00
For use with 48" 120v Fan #6622-1310. Toggle switch (DPST) used to start/stop the Fan or Pump. Pump switch should never be turned on unless there is water in the pump/reservoir.
California residents: Click here for Proposition 65 warning.
$ 16.00
Toggle switch (SPST) used to start/stop the Fan or Pump. Pump switch should never be turned on unless there is water in the pump/reservoir.
California residents: Click here for Proposition 65 warning.
$ 13.00
Front bearing for old style 36" Belt Drive units and some 48" units.
California residents: Click here for Proposition 65 warning.
$ 96.00
Rear bearing for old style 36" Belt Drive units and some 48" units.
California residents: Click here for Proposition 65 warning.
$ 96.00
Float Valve- Bronze Heavy Duty. Fits 2002-Present Models Except Zone 11K.
Video: How to Adjust a Float Valve for Proper Water Level Settings.
$ 49.00
Float Valve conversion kit needed to convert old style box type float to new/current style. For all models except Zone 11K.
$ 68.43
This cord can be used as a replacement for 18", 24" , and 36" models.
$ 74.00
Replacement Jobe Float water valve. Used in Zone 11K only, for units already converted from water solenoid.
$ 67.00
Powder Coated
$ 2,249.00
$ 2,499.00
$ 2,699.00
$ 2,999.00
