36" Fan Parts
PolarCool Evaporative Cooler Parts & Replacement Components
PolarCool evaporative cooler parts and replacement components help keep your evaporative cooler fans operating at peak performance. This collection includes genuine and compatible replacement parts designed for PolarCool portable, commercial, and industrial evaporative cooler units. Whether you need new cooling pads, water pumps, filters, floats, or maintenance components, using the correct evaporative cooler replacement parts ensures consistent airflow, efficient cooling, and longer equipment life.
Evaporative cooler systems depend on properly functioning pads, pumps, and water distribution components to deliver effective temperature reduction. Over time, mineral buildup and normal wear can reduce performance. Replacing worn evaporative cooler parts restores airflow efficiency and cooling output while helping prevent downtime during peak heat periods.
Our evaporative cooler replacement parts are selected for fit, durability, and performance across a wide range of PolarCool models. These parts are commonly used in warehouses, garages, workshops, job sites, outdoor cooling areas, and commercial facilities where evaporative cooling systems run for extended hours.
Common replacement components include evaporative cooling pads, circulation pumps, float valves, hoses, filters, and other service parts required for routine maintenance. Regular inspection and scheduled replacement of high-wear parts is one of the most effective ways to maintain strong cooling performance and extend the service life of your evaporative cooler fan.
If you are unsure which evaporative cooler part fits your unit, refer to your model number or contact support for compatibility guidance. Properly matched replacement parts ensure safe operation and optimal cooling results.
Replacement parts for 36" Stainless Steel & Black Powder Coated PolarCool fans.
PolarCool 36" Pad Kit - Single Pad (Part No. 6450-6068)
Restore peak performance to your PolarCool evaporative cooling fan with this individual replacement pad. Designed specifically for PolarCool 36" models, this single evaporative cooling media pad allows for convenient replacement of damaged o...
$ 91.00
PolarCool 36" Pad Kit - Set of 5 (Part No. 6450-6010)
Restore peak performance to your PolarCool evaporative cooling fan with this 36" Pad Kit. Designed specifically for PolarCool 36" models, this replacement media kit helps portable evaporative air coolers, swamp coolers, and industrial air cool...
$ 454.00
PolarCool 36" Pad Kit - 6 Sets of 5 (Part No. 6450-6069)
Maximize value and ensure continuous operation with this bulk replacement pad kit for PolarCool evaporative cooling fans. Designed specifically for PolarCool 36" models, this comprehensive package provides 30 high-performance evaporative co...
$ 2,599.00
PolarCool Pro 36" Pad Kit - Set of 4 (Part No. 6450-6014)
Restore peak performance to your PolarCool Pro evaporative cooling fan with this 36" Pad Kit. Designed specifically for PolarCool 36" Pro models and select legacy units, this replacement media kit helps portable evaporative air coolers, sw...
$ 272.00
Evap-O-Matic with AT-8TM tablets prevent the buildup of slime and scale that can clog the pads of the PolarCool evaporative cooling fan, as well as eliminate odors created by microorganisms. They are easy to use, completely water-soluble, and do not form deposits in the reservoir.
CHARACTERISTICS...
From $ 74.95
The PolarCool Pump - 18/24/36" 120v Pump (Part No. 6422-0645) is an essential replacement component for your evaporative cooling system. Designed to fit all 18", 24", and 36" models, including the Zone 11K (36" gray rotomolded plastic model) and Pro models, this pump ensures efficient water circu...
$ 336.00
The PolarCool Water Hose Adapter Kit (Part No. 1021-3000) is a crucial component designed to ensure seamless water supply for your PolarCool evaporative cooling fans. This replacement water supply fitting allows for a direct connection to a garden hose, providing a reliable water source for optim...
$ 29.00
The 36" Model Protective Cover (Part No. 6421-13012) is a heavy-duty, custom-fit cover designed specifically for 36" PolarCool evaporative cooling fans. Perfect for off-season storage or covering your fan between uses, this durable, water-resistant polyester cover shields your equipment from weat...
$ 199.00
The PolarCool Float Valve Replacement (Part No. 6450-6067) is an essential component designed to control the water flow into your evaporative cooling fan. This adjustable float valve assembly is compatible with 18", 24", 36", and 48" models, excluding Pro and Zone models. As the float rises, the ...
$ 49.00
The PolarCool 36" Single Speed Motor (Part No. 3017-2271) is a high-quality replacement motor specifically designed for single speed direct drive fans. If you're looking to replace a worn-out motor in your 36" cooling fan, this is the perfect solution to restore optimal performance.
Key Features
...
$ 497.00
The PolarCool Motor-36" (Vosterman/115v 1/2 HP) (Part No. 6422-6023) is a high-performance replacement motor designed for use in 36" variable speed evaporative cooling models. This motor is compatible with a range of models, including standard black and powder coated versions, as well as Pro and ...
$ 640.00
The 36" Control Plate (Part No. 6450-6060) is a replacement control board and touchpad interface designed for 36" PolarCool evaporative cooling fans. This complete assembly allows you to operate the fan's 10 variable speeds and pump control, providing precise airflow and cooling management for wa...
$ 400.00
The PolarCool Control Box Seal (18/24/36") (Part No. 1028-3500) is a vital replacement component designed for PolarCool evaporative cooling fans. This high-quality rubber seal is specifically tailored to fit 18", 24", and 36" powder-coated black or stainless steel models, effectively preventing w...
$ 20.00
The PolarCool Power Twist Belt (Part No. 1022-2998) is a high-performance replacement belt designed for all PolarCool belt drive portable evaporative air coolers, industrial air coolers, and swamp coolers. Sold by the foot for flexible ordering, this innovative linked belt system delivers reliabl...
$ 22.00
The Water Quick Connect Kit (Part No. 6540-1593) eliminates the hassle of threading and unthreading hoses every time you fill your PolarCool evaporative cooling fan. This all-brass quick connect kit includes both male and female 3/4" fittings, providing a fast, tool-free connection between your g...
$ 14.00
The PolarCool Terminal Block 3 Position (Part No. 3006-5082) is a replacement electrical connector designed for older model PolarCool portable evaporative air coolers and industrial air coolers with removable terminal block circuit boards. This 3-position terminal block provides secure electrical...
$ 5.10
The PolarCool Front-Flange Bearing Mount (Part No. 6403-1115) is a high-quality replacement assembly designed specifically for older model 36" belt drive fans and select 48" models. This front flange bearing assembly is essential for maintaining the stability and efficiency of your cooling system...
$ 96.00
The PolarCool Rear-Flange Bearing Mount (Part No. 6403-1114) is a crucial replacement assembly designed for older model 36" belt drive fans and select 48" models. This rear flange bearing assembly plays an integral role in maintaining the stability and efficiency of your cooling system.
Key Featu...
$ 96.00
The PolarCool 3/4" Drain Outlet Replacement (Part No. 0006-7010) is an essential component designed for various PolarCool evaporative cooler models. This drain outlet assembly is specifically engineered to fit black powder coated and stainless steel models, providing a reliable solution for maint...
$ 9.90
The PolarCool Liquid Level Switch (Part No. 3001-0050) is a critical safety and protection component designed for PolarCool portable evaporative air coolers with touchpad controllers. This intelligent liquid level sensor features a small float that raises and lowers with the water level, sending ...
$ 46.00
The PolarCool Replacement Fuse - 1 Amp (Part No. 3010-2999) is an essential safety component designed to protect the electronics of PolarCool portable evaporative air coolers, specifically for 18", 24", and 36" models, including the Zone and PRO series. This 1 amp fuse safeguards control boards a...
$ 1.30
The PolarCool Toggle Switch 48" 240V Models (Part No. 3001-2865) is a durable replacement switch designed for controlling the fan motor or pump in PolarCool evaporative air coolers. This Double Pole Single Throw (DPST) toggle switch is specifically engineered for 240V 48" models, providing reliab...
$ 19.00
The GFCI Power Cord (Part No. 6422-4004) is a 20-foot replacement cordset with inline GFCI (Ground Fault Circuit Interrupter) protection, designed for 18", 24", and 36" 120V PolarCool evaporative cooling fans. This includes Zone 11K (36" gray rotomolded plastic model) and Pro models. The inline G...
$ 74.00
The PolarCool Toggle Switch 18/24/36" Models (Part No. 3001-2862) is a reliable replacement switch designed to control the fan motor or pump in PolarCool evaporative air coolers. This Single Pole Single Throw (SPST) toggle switch is compatible with 18", 24", and 36" models that utilize toggle swi...
$ 16.00
The PolarCool Prop Pulley - 36" Old Belt Drive (Part No. 1011-5002) is a high-quality replacement pulley specifically designed for older style 36" belt drive evaporative cooling models. Engineered to meet the requirements of 120V systems, this Fenner 8.4 pulley ensures optimal performance and rel...
$ 98.00
The PolarCool Terminal Block 2 Position (Part No. 3006-5107) is a replacement electrical connector designed for older model PolarCool portable evaporative air coolers and industrial air coolers with removable terminal block circuit boards. This 2-position terminal block provides secure electrical...
$ 7.20
The PolarCool Wire Harness Variable Speed (Part No. 1903-6000) is an essential replacement component for older PolarCool evaporative fans that feature variable speed controls. This prewired harness comes equipped with toggle switches and a speed control knob, allowing users to easily adjust the f...
$ 58.00
The PolarCool Control Box Seal (36" Zone) (Part No. 1028-6013) is an essential replacement part designed for Zone 11K evaporative cooling fans. This durable rubber seal is specifically crafted to protect the electronic enclosure from water and debris, ensuring reliable performance and longevity o...
$ 18.00
The PolarCool Motor Pulley - 36" 120V Single or Dual Speed (Part No. 1011-2637) is a high-quality replacement component specifically designed for 36" fans operating on 120V. This versatile pulley is suitable for both single speed (toggle switch on/off) and dual speed (toggle switch high/low) conf...
$ 55.00
The PolarCool Splash Guard Thumb Screw (Part No. 1004-0001) is an essential component designed for the Zone 11K evaporative cooling models. This innovative thumb screw allows for toolless access to the spray bar and pads, making maintenance and adjustments a breeze.
Key Features
Toolless Design...
$ 1.10
The 36" Prop-3 Blade (Part No. 6403-5605) is a replacement fiberglass propeller designed for current PolarCool Classic and Pro 36" evaporative cooling fans. Featuring a durable red 3-blade design, this prop is engineered for use with the Vosterman motor (SKU 6422-6023) and delivers high-performan...
$ 297.00
The PolarCool Prop 36" Single Speed/Direct Drive (Part No. 6403-6112) is a high-quality replacement propeller crafted specifically for older style single-speed direct drive fans. This durable fiberglass propeller is designed to enhance the performance of your cooling system, ensuring efficient ai...
$ 396.00
The PolarCool 36" Prop - Old 4 Blade Galvanized (Part No. 6403-2420) is a high-quality replacement propeller specifically engineered for older style 36" belt drive evaporative cooling models. Constructed from durable galvanized material, this propeller is designed to enhance the performance and e...
$ 371.00
The PolarCool 36" Mesh Guard Replacement (Part No. 0011-7007) is specifically designed to enhance the safety and functionality of your PolarCool evaporative cooling fans. This durable black wire mesh guard effectively protects outside objects from the rotation of the fan propeller, ensuring that ...
$ 140.00
The PolarCool 36/48" Wheel Kit (Set of 4) (Part No. 6450-6051) is an essential accessory designed for PolarCool evaporative cooling fans. This high-quality caster kit enhances mobility, allowing your cooling solution to easily traverse various terrains.
Key Features
Durable Construction: Each c...
$ 282.00
The 36" Pro Protective Cover (Part No. 6521-0051) is a heavy-duty, custom-fit cover designed specifically for 36" Pro PolarCool evaporative cooling fans. Perfect for off-season storage or covering your fan between uses, this durable, water-resistant polyester cover shields your equipment from wea...
$ 199.00
The PolarCool Pro Water Supply Fitting (Part No. 1021-1104) is a direct-replacement garden hose connector designed for PolarCool 36" Pro portable evaporative air coolers. This threaded fitting mounts to the front of the fan, providing a secure attachment point for garden hose water supply lines. ...
$ 12.00
The PolarCool 3/4" Drain Cap Replacement (Part No. 6422-6022) is a direct-replacement drain cap and washer assembly designed for PolarCool evaporative coolers with 3/4" drain outlets. Featuring a rubber washer for reliable sealing, this cap prevents leaks and ensures proper reservoir drainage in ...
$ 5.80
PolarCool 90 Gallon Water Cart (Part No. 6540-1809)
Extend the runtime of your evaporative cooling system with the PolarCool 90-Gallon Water Cart — the ultimate accessory for uninterrupted all-day cooling. Designed to provide continuous water supply to your PolarCool fan through gravity-fed deliv...
$ 999.00
$ 1,750.00
1 – 40 products of 40
Powder Coated
$ 2,999.00
$ 4,949.00
$ 2,399.00
$ 3,599.00
$ 2,799.00
$ 4,299.00
$ 3,499.00
$ 5,799.00