Top Selling Parts
PolarCool Evaporative Cooler Parts & Replacement Components
PolarCool evaporative cooler parts and replacement components help keep your evaporative cooler fans operating at peak performance. This collection includes genuine and compatible replacement parts designed for PolarCool portable, commercial, and industrial evaporative cooler units. Whether you need new cooling pads, water pumps, filters, floats, or maintenance components, using the correct evaporative cooler replacement parts ensures consistent airflow, efficient cooling, and longer equipment life.
Evaporative cooler systems depend on properly functioning pads, pumps, and water distribution components to deliver effective temperature reduction. Over time, mineral buildup and normal wear can reduce performance. Replacing worn evaporative cooler parts restores airflow efficiency and cooling output while helping prevent downtime during peak heat periods.
Our evaporative cooler replacement parts are selected for fit, durability, and performance across a wide range of PolarCool models. These parts are commonly used in warehouses, garages, workshops, job sites, outdoor cooling areas, and commercial facilities where evaporative cooling systems run for extended hours.
Common replacement components include evaporative cooling pads, circulation pumps, float valves, hoses, filters, and other service parts required for routine maintenance. Regular inspection and scheduled replacement of high-wear parts is one of the most effective ways to maintain strong cooling performance and extend the service life of your evaporative cooler fan.
If you are unsure which evaporative cooler part fits your unit, refer to your model number or contact support for compatibility guidance. Properly matched replacement parts ensure safe operation and optimal cooling results.
PolarCool Top Selling Replacement Parts for all of your PolarCool evaporative coolers.
Evap-O-Matic with AT-8TM tablets prevent the buildup of slime and scale that can clog the pads of the PolarCool evaporative cooling fan, as well as eliminate odors created by microorganisms. They are easy to use, completely water-soluble, and do not form deposits in the reservoir.
CHARACTERISTICS...
From $ 74.95
The PolarCool Pump - 18/24/36" 120v Pump (Part No. 6422-0645) is an essential replacement component for your evaporative cooling system. Designed to fit all 18", 24", and 36" models, including the Zone 11K (36" gray rotomolded plastic model) and Pro models, this pump ensures efficient water circu...
$ 336.00
PolarCool 36" Pad Kit - Set of 5 (Part No. 6450-6010)
Restore peak performance to your PolarCool evaporative cooling fan with this 36" Pad Kit. Designed specifically for PolarCool 36" models, this replacement media kit helps portable evaporative air coolers, swamp coolers, and industrial air coo...
$ 454.00
PolarCool 36" Pad Kit - 6 Sets of 5 (Part No. 6450-6069)
Maximize value and ensure continuous operation with this bulk replacement pad kit for PolarCool evaporative cooling fans. Designed specifically for PolarCool 36" models, this comprehensive package provides 30 high-performance evaporative co...
$ 2,599.00
PolarCool 36" Pad Kit - Single Pad (Part No. 6450-6068)
Restore peak performance to your PolarCool evaporative cooling fan with this individual replacement pad. Designed specifically for PolarCool 36" models, this single evaporative cooling media pad allows for convenient replacement of damaged o...
$ 91.00
PolarCool 48" Pad Kit - Set of 6 (Part No. 6450-6009)
Restore peak performance to your PolarCool evaporative cooling fan with this 48" Pad Kit. Designed specifically for PolarCool 48" models, this replacement media kit helps heavy-duty evaporative coolers and portable swamp coolers maintain maxi...
$ 680.00
The PolarCool Float Valve Replacement (Part No. 6450-6067) is an essential component designed to control the water flow into your evaporative cooling fan. This adjustable float valve assembly is compatible with 18", 24", 36", and 48" models, excluding Pro and Zone models. As the float rises, the ...
$ 49.00
The PolarCool Pump - 48" 230v Pump (Part No. 6422-0647) is a vital replacement component for your evaporative cooling system. Specifically designed for all 240V 48" models, this pump ensures that your cooling unit operates efficiently by effectively circulating water to provide the cool air you n...
$ 499.00
The PolarCool Motor-36" (Vosterman/115v 1/2 HP) (Part No. 6422-6023) is a high-performance replacement motor designed for use in 36" variable speed evaporative cooling models. This motor is compatible with a range of models, including standard black and powder coated versions, as well as Pro and ...
$ 640.00
PolarCool Pro 36" Pad Kit - Set of 4 (Part No. 6450-6014)
Restore peak performance to your PolarCool Pro evaporative cooling fan with this 36" Pad Kit. Designed specifically for PolarCool 36" Pro models and select legacy units, this replacement media kit helps portable evaporative air coolers, s...
$ 272.00
The PolarCool Motor 48" 240v Model (Current) (Part No. 3017-3080) is a high-performance replacement motor specifically designed for 240v 48" evaporative cooling models. This motor is the current model used across all 48" 240v units, ensuring optimal functionality and reliability for your cooling ...
$ 599.00
The PolarCool 36" Single Speed Motor (Part No. 3017-2271) is a high-quality replacement motor specifically designed for single speed direct drive fans. If you're looking to replace a worn-out motor in your 36" cooling fan, this is the perfect solution to restore optimal performance.
Key Features...
$ 497.00
The PolarCool 36" Control Plate (Zone) (Part No. 6450-6057) is a vital replacement component designed specifically for the Zone 11K 36" gray rotomolded plastic evaporative cooler. This kit provides a touchpad interface that allows users to operate the fan at 10 variable speeds and control the pum...
$ 400.00
The 36" Control Plate (Part No. 6450-6060) is a replacement control board and touchpad interface designed for 36" PolarCool evaporative cooling fans. This complete assembly allows you to operate the fan's 10 variable speeds and pump control, providing precise airflow and cooling management for wa...
$ 400.00
The PolarCool Motor-18/24" Prior to 2014 (Part No. 3017-5018) is a vital replacement component for PolarCool evaporative cooling fans designed for 18" and 24" models manufactured before 2014. This high-performance motor ensures your cooling system operates efficiently, providing reliable airflow ...
$ 497.00
PolarCool 24" Pad Kit - Set of 3 (Part No. 6450-6005)
Restore peak performance to your PolarCool evaporative cooling fan with this 24" Pad Kit. Designed specifically for PolarCool 24" models, this replacement media kit helps portable evaporative air coolers and swamp coolers maintain maximum coo...
$ 204.00
The 24" Prop - 4 Blade Red FG (Part No. 6403-6001) is a replacement 4-blade fiberglass propeller designed for 24" PolarCool evaporative cooling fans manufactured prior to 2014. Engineered for use with motor SKU 3017-5018, this durable red fiberglass prop delivers reliable airflow performance for ...
$ 354.00
The PolarCool Power Twist Belt (Part No. 1022-2998) is a high-performance replacement belt designed for all PolarCool belt drive portable evaporative air coolers, industrial air coolers, and swamp coolers. Sold by the foot for flexible ordering, this innovative linked belt system delivers reliabl...
$ 22.00
The PolarCool Water Hose Adapter Kit (Part No. 1021-3000) is a crucial component designed to ensure seamless water supply for your PolarCool evaporative cooling fans. This replacement water supply fitting allows for a direct connection to a garden hose, providing a reliable water source for optim...
$ 29.00
The PolarCool Pillow Block Bearing (Part No. 1016-0100) is a precision-engineered replacement bearing assembly designed for 48" belt drive portable evaporative air coolers and industrial air coolers. This durable pillow block bearing assembly features a grease fitting for easy maintenance and ext...
$ 48.00
PolarCool Float Valve Conversion Kit (Part No. 6450-7613)
Upgrade your PolarCool evaporative cooling system with the Float Valve Conversion Kit — designed to convert older box-type float valves to the current, more reliable float valve design. This essential upgrade kit provides automatic water ...
$ 68.43
The PolarCool 3/4" Drain Outlet Replacement (Part No. 0006-7010) is an essential component designed for various PolarCool evaporative cooler models. This drain outlet assembly is specifically engineered to fit black powder coated and stainless steel models, providing a reliable solution for maint...
$ 9.90
The PolarCool Terminal Block 3 Position (Part No. 3006-5082) is a replacement electrical connector designed for older model PolarCool portable evaporative air coolers and industrial air coolers with removable terminal block circuit boards. This 3-position terminal block provides secure electrical...
$ 5.10
The PolarCool Splash Guard Thumb Screw (Part No. 1004-0001) is an essential component designed for the Zone 11K evaporative cooling models. This innovative thumb screw allows for toolless access to the spray bar and pads, making maintenance and adjustments a breeze.
Key Features
Toolless Design:...
$ 3.45
The Water Quick Connect Kit (Part No. 6540-1593) eliminates the hassle of threading and unthreading hoses every time you fill your PolarCool evaporative cooling fan. This all-brass quick connect kit includes both male and female 3/4" fittings, providing a fast, tool-free connection between your g...
$ 14.00
The GFCI Power Cord (Part No. 6422-4004) is a 20-foot replacement cordset with inline GFCI (Ground Fault Circuit Interrupter) protection, designed for 18", 24", and 36" 120V PolarCool evaporative cooling fans. This includes Zone 11K (36" gray rotomolded plastic model) and Pro models. The inline G...
$ 74.00
The PolarCool Pro (Brass) Drain Assembly (Part No. 6422-6017) is a complete replacement drain kit designed for early versions of the PolarCool black 36" Pro portable evaporative air coolers. Featuring durable brass construction, this 3/4" drain assembly provides reliable reservoir drainage for ma...
$ 19.00
PolarCool Pro 36" Pad Kit - Single Pad (Part No. 6450-6070)
Restore peak performance to your PolarCool Pro evaporative cooling fan with this individual replacement pad. Designed specifically for PolarCool 36" Pro models and select legacy units, this single evaporative cooling media pad allows fo...
$ 68.00
1 – 29 products of 29
Powder Coated
$ 2,999.00
$ 4,949.00
$ 2,399.00
$ 3,599.00
$ 2,799.00
$ 4,299.00
$ 3,499.00
$ 5,799.00